Home | LED | Blog | Resources | Faqs | Distributors | About DyoCore | Contact
 
dyocore home
 
SolAir I™
Hybrid Wind/Solar Power


Technical Specs

  • Weight 60lbs. fully assembled.
  • Can be setup and installed within minutes out of box
  • Height of SolAir from it's mount bracket surface to the blade at it's highest point is only 67".
  • Blade diameter is 64".
  • Number of Blades - 3 (Aluminum - powdercoated)
  • Maximum output is approximately 2.2kW (38 to 40mph winds)
  • Average annual power is approximately 500 to 1000kWh (12 to 15mph average annual winds)
  • Quieter than a whisper with no vibration
  • Optimal install height is along the roof line or above 20'.
  • SolAir units can be stacked when more energy generation/storage power is needed.
  • Federal 30% tax credit
  • TUV Field Eval
  • On-grid or Off-Grid - combined DC solar/wind output for simple plug and play.
  • Shipping Details:
    • Frame & Mounting Hardware - 1 Box, 50" x 11" x 20", 50 lbs
    • SolAir Motor - 1 Box, 13" x 13" x 10". 28 lbs

How much power can SolAir create?

Get Adobe

DyoCore Installation/Setup of a SolAir System
http://www.youtube.com/watch?v=dAQfjEgtVXI

Rooftop wind makes for a difficult application. Areas around a rooftop present several obstacles such as surrounding trees, surfaces that cause wind friction and turbulent conditions in addition to other homes and buildings within close proximity to your install site.

It is recommended that you install a simple wind meter and some wind streamers approximately 4 feet above your intended generator mounting area to collect wind data and its flow around your intended install site. This will provide you with a baseline for both function and expectations.

When space, resources and permitting are available it is always recommend to install any turbine high above the ground and well away from obstacles. A qualified site will make all the difference in the success of your application!

 
 

 

 
 

Share