Contact us to get more information or referral to a distributor in your area.
Home | Blog | Resources | Faqs | Distributors | About DyoCore | Login |
 

SolAir is a dynamic hybrid smart power generator that combines wind/solar integrated into a single balanced frame/fin design. SolAir is designed so versatile it can be mounted on any flat horizontal, vertical or pitched surface and can be either bolted or ballasted down. SolAir's unique design allows it to work effectively in low turbulent winds from any direction.

For the majority of property owners living in urban areas, installing wind turbines on or close to buildings with overall wind speeds of less than 14 mph has not been a realistic proposition. Equipment is expensive, hard to install, electricity generation will be disappointing and pay-back periods are likely to recede into the distant future if at all.

DyoCore products present a dramatic change to this way of thinking. DyoCore turbines have been specifically tooled and specifically created for turbulent wind in both low wind and obstructed areas.  Perfect for the average home roof!

 

Technical Specs

  • Weight 60lbs. fully assembled.
  • Can be setup and installed within minutes out of box
  • Height of SolAir from it's mount bracket surface to the blade at it's highest point is only 67".
  • Blade diameter is 64".
  • Number of Blades - 3 (Aluminum - powdercoated)
  • Maximum output is approximately 2.2kW (38 to 40mph winds)
  • Average annual power is approximately 500 to 1000kWh (12 to 15mph average annual winds)
  • Quieter than a whisper with no vibration
  • Optimal install height is along the roof line or above 20'.
  • SolAir units can be stacked when more energy generation/storage power is needed.
  • Federal 30% tax credit
  • TUV Field Eval
  • On-grid or Off-Grid - combined DC solar/wind output for simple plug and play.
  • Shipping Details:
    • Frame & Mounting Hardware - 1 Box, 50" x 11" x 20", 50 lbs
    • SolAir Motor - 1 Box, 13" x 13" x 10". 28 lbs

    DyoCore Installation/Setup of a SolAir System
    http://www.youtube.com/watch?v=dAQfjEgtVXI

          • SolAir Performance
          • Small Wind Barriers
          • Inverters
          • Environmental Conditions at Install Site
          • Additional Equipment – Steppers / Capacitors
          • Technology Development
          • Successful Deployment Model

Annual Wind/Power production is based on the estimated annual energy you can potential experiece from a collective average annual wind speed.

Rooftop wind makes for a difficult application. Areas around a rooftop present several obstacles such as surrounding trees, surfaces that cause wind friction and turbulent conditions in addition to other homes and buildings within close proximity to your install site.

It is recommended that you install a simple wind meter and some wind streamers approximately 4 feet above your intended generator mounting area to collect wind data and its flow around your intended install site. This will provide you with a baseline for both function and expectations.

When space, resources and permitting are available it is always recommend to install any turbine high above the ground and well away from obstacles.

A qualified site will make all the difference in the success of your application!
 

Design Your Energy System
Easy Math Tool

How much power can SolAir create?

Get Adobe
 
The material provided herein is on a best efforts basis and will be subject to changes in the near future. DyoCore Inc. strives to provide the most current information as obtained from our continued testing and development of the SolAir for optimal and efficient performance with a variety of Inverter/Controller equipment. Contact us directly if you have specific questions or suggestions at support@dyocore.com.
 
 
Contact us to get more information or referral to a distributor in your area.